Holms PL

High-efficient Pick-up Sweeper with side brush and dust eliminating system, Dustbuster


Self-Adjusting Suspension

Easy drive

”Ready to sweep”


Effective dust elimination


Unsurpassed sweeping result with brush core that adapts to the slope of the ground. Self Adjusting Suspension.

Easy drive

Floating gate design - Connect and drive


Equip the sweeper with Dustbuster to eliminate dust formation outside the sweeper.

Follows changes

Brush core follows the ground

Minimal brush wear

Designed for best sweeping results with minimal brush wear

Correct ground pressure

Unique link arms provide correct ground pressure

Holms PL - Adapts to ground

Self adjusting suspension

The floating gate designmeans that the attachment and the brush always follow the surface, regardless of which position the wearer is in. This provides minimal brush wear and compliance with slopes and irregularities. The sweeping result is improved further thanks to the brush core being supported on link arms that give the brush exactly the right ground pressure in all positions.

Self Adjusting Suspension simply means that the sweeper moves up and down and adapts to the changes in the road. It gives an optimal sweeping result with minimal brush wear.

Compact design

Large waste container - large water tank

Long up time

With a large water tank and a frugal water pump, you get extra long driving time

Maximum overview

Sweeper with low profile


Large sweeping container

Long up time

Large water tank


Low profile

Holms PL - Performance


Powerful sweeper for compact wheel loaders and tractors

Our pick-up sweeper PL, is without a doubt one of our most popular sweepers for tractors and skid steer loaders. The sweeper has a high sweeping volume and with our dust reduction kit the dust is eliminated and swept up.

The sweeper is designed to be as easy to sweep as possible. Connect the machine to the floating gate and hydraulics and drive. The sweeper follows height adjustments with minimal intervention from you as a driver.

Equipped with the dust reduction kit Dustbuster has measurements have measured low 79 decibels 2 meters from the sweeper.


Eliminate dust

Highly efficient water mist

Thick rubber sides

Reduced noise level

Low noise level

With Dustbuster installed, the sound level is 79db (A) 2m from the implement

Better working environment

Highly efficient water mist

Eliminate dust

Sweep indoors


Low noise level

Holms PL - Eliminate dust with Dustbuster


Dustbuster is an accessory to eliminate the amount of dust when sweeping. The technology is based on a system with a water mist that binds the dust behind dense rubber cloths. Cleaner air and better working environment.

Water mist binds the dust

Dustbuster has a design where dust and debris are brushed up by brushes in a container behind tight rubber sheets. During the work, both the container and the side brush are showered with a water mist to bind the dust. No dust is stirred up in the air, the only thing the machine leaves behind is a clean and moistened surface.

Use indoors

When the sweeper is equipped with our popular Dustbuster kit, it can be used indoors. For example in a warehouse or industry. The water mist means that the dust is greatly reduced and the work can continue.

Low noise level

When sweeping takes place behind dense rubber sheets, the noise level drops. The values for our Dustbuster have been measured at a low 79dB (A) 2 meters from the machine.


Uneven road when driving?

Is the road you sweep uneven and requires constant adjustment? Holms PL has a movable gate construction that allows the entire sweeper to move without adjustment from the cab.

Integrated hydraulic motor

The hydraulic motor is located inside the brush core to be protected and enable a compact design with minimal width. 

Bracket included

Holms offers a large number of different mounts, several different machine types. Choose freely from our standard range.

615 mm brush rings

The sweeper is equipped with Beeline (ring brush) which has a diameter of 615 mm. The brush roller is easily replaced by loosening the link arms that hold the brush core.

Hardox wear plate

The three wheels of the sweeper prevent the underside from scratching against the ground during normal driving. For more extreme sweeping with unnormal highs and lows the sweeper is equipped with Hardox steel wear plates to prevent damage.

Inspection and flush holes

On the side of the sweeper, the container, there are separate inspection and flush holes that allow you to easily inspect or clean the attachment after work.

Holms PL  – Explained

Holms PL is a highly efficient sweeper for front-mounted compact loaders and tractors. These are some of the features of the sweeper. 

  1. Floating gate - Allows the attachment to follow the ground without adjustment from the driver. 
  2. Screwable bracket
  3. Water tank with efficient water pump.
  4. Three cast iron support wheels. One front and two at the back of the sweeper.
  5. Side/Gutter brush (optional)
  6. Dust elimination with Dustbuster. Rubber sheets, water mist and side brush cover (optional)
  7. Led lighting

Technical specification

ModelPL 150PL 185PL 215PL 250
Working width1,50 m1,85 m2,15 m2,50 m
Total width, incl side/gutter brush1,70 m2,05 m2,35 m2,70 m
Water tank, volume190 l240 l240 l270 l
Sopvolym, effektiv (cirka)170 l220 l250 l290 l
Weight, standard design290 kg305 kg320 kg345 kg
Brush diameter0,60 m0,60 m0,60 m0,60 m
Recommended oil flow40/60 l/m40/60 l/m40/60 l/m40/60 l/m
ModelPL 150PL 185PL 215PL 250
Working width4.9 ft6.0 ft7.0 ft8.2 ft
Total width, incl side/gutter brush5.6 ft6.7 ft7.7 ft8.85 ft
Water tank, volume50 US Gallon63 US Gallon63 US Gallon71 US Gallon
Sopvolym, effektiv (cirka)45 US Gallon58 US Gallon66 US Gallon77 US Gallon
Weight, standard design640 lbs672 lbs705 lbs760 lbs
Brush diameter1.9 ft1.9 ft1.9 ft1.9 ft
Recommended oil flow7.9/15.9 GPM7.9/15.9 GPM7.9/15.9 GPM7.9/15.9 GPM